Connecting the transmitter to the mains
The transmitter can be connected to 230 V or 115 V AC. Before you plug the mains connector into the wall socket, please first check that the transmitter is set to the correct mains voltage!
The set voltage is shown at the top of the fuse holder .
Selecting the mains voltage
WARNING! Electric shock hazard!
In case of improper handling, you may come into contact with electrically conducting parts and receive an electric shock when removing the fuse holder.
Before removing the fuse holder, pull out the mains connector from the wall socket.
To select the mains voltage, proceed as follows:
Disconnect the transmitter completely from the mains by pulling out the mains connector from the wall socket.
Use a screwdriver to loosen the fuse holder .
Remove the fuse holder with the inserted fuse.
Turn the fuse holder by 180° and reinsert it.
The set voltage is shown at the top of the fuse holder.
14