Connecting the headphones/monitoring the audio signal
Attention! High volume!
Even short exposure to high volume levels can damage your hearing! Set the volume for the connected headphones to the minimum before putting the headphones on. Do not listen at higher volume levels than with loudspeakers.
Connect headphones with a ¼“ (6.35 mm) stereo jack plug to the headphone output to monitor the stereo audio signal present at the audio inputs AF IN (L) and
AF IN (R) + MONO.
Note
Even during mono operation, the left and right channel are reproduced separately via the headphones.
First, set the volume control to the lowest volume by turning it to the left as far as possible. Then gradually turn up the volume.
18