Mounting and connecting remote antennas
Use a remote antenna when the transmitter position is not the best antenna position for optimum transmission. You can choose between two antennas (see “Accessories” on page 29):
yA 2003 UHF passive directional antenna
yA 1031 passive omni-directional antenna
Use a low-attenuation 50-Ωcable to connect the antenna to the transmitter. Ready-made antenna cables from Sennheiser are available as accessories with length of 5 m and 10 m. If possible, use a short antenna cable and as little connections as possible, since long cables and many connectors lead to an attenuation of the antenna signal. Position antennas in the same room in which the transmission takes place! Maintain a minimum distance of 1 m from metal objects (including reinforced concrete walls)!
Connecting the mixing console
Connect the mixing console to the XLR-3 sockets AF IN (L) and AF IN (R) + MONO .
Note
Any unit that is only suitable for mono operation must be connected to the XLR-3 socket AF IN (R) + MONO . In this case, set the transmitter to mono operation (see “Switching between mono and stereo operation” on page 22).