Connecting the mains cable
Insert the supplied mains cable into the socket on the transmitter and pass the cable through the cable grip.
Note
A cable grip is particularly important when the transmitter is permanently rack-mounted. Inside the rack there are often a large number of cables – a cable grip prevents the cables from pulling each other out.
Using transmitters in a multi-channel system
You can combine several transmitters to make a multi-channel system. To do so, you require an antenna combiner (e.g. the AC 3000, see “Accessories” on page 29) which allows you to combine the signals of up to four twin receivers onto a single antenna (see diagram below). For detailed information on setting up a multi-channel system and on connecting the transmitters, please refer to the operating manual of the antenna combiner.
ANT
RF OUTPUT
8:1