LC-52LE920UN/LC-60LE920UN
10)INPUT MODE FIXED
Selection
Default
Explanation
Limit in Setting
Exception
Remarks
11)RC_PATH_THROUGH
Selection Selection between "OFF", "ON: TV RCE" and "ON: TV RCD" (loop provided)
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks None
12)AV POSITION FIXED
Selection Selection between "Variable" and "Fixed" (loop provided)
Default Variable
Explanation Incase of"Fixed" setting,
- Menu "Picture" and "Audio" setting can't be changed like "Dynamic (Fixed)".
- When "AV Mode" key is pressed, TV just displays current AV Mode (cannot be changed.).
Limit in Setting None
Exception None
Remarks • When receiving with AV Position key, OPC, Dolby keyand other direct audio select keys, the current display stays on and no
setting can bechanged.
• Even by initializing personal information, the hotel-mode settings are kept intact. In this way, the AV positions, video and
audio adjustment settings are not initialized.
13)LOUD SPEAKER (ON/OFF)
Selection Selection between "ON" and "OFF" (loop provided)
Default ON
Explanation If"OFF" isselected, TV stops Speaker output even without Headphone connected.
Limit in Setting None
Exception None
Remarks • Press the volume UP/DOWN key, and the mute iconappears for 4 seconds.
• The mute keyand audio-related keysare displayed with caution.
• Usually, the headphones and monitor audio outputs can be adjustable.
14)232C POWON
Selection Selection between "Disable" and "Enable" (loop provided)
Default Disable
Explanation Inthe standby mode, the power-on bythe 232C command is enabled or disabled.
Limit in Setting None
Exception None
Remarks None
Selection between "Variable", "Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)" (loop provided)
- (Variable)
• At the "Fixed" setting, the TV set gets started with thesettings of "Input mode start", and then any other channels and inputs
are not accepted.
• At the "ACON (AC CTRL)" setting, the TV setgets started with the settings of "Input mode start" underAC control.
• Atthe "AC/RCON (AC/RC CTRL)" setting, the TV set getsstarted with the settings of "Input mode start" under either control.
• With the execution of hotel mode, theinput source is forced tochange tothat setby "Input mode start" and the channel
switching and input switching areprohibited thereafter.
• ON-timer's (Wake-up timer) channel items are not displayed or the operation isprohibited. (Basically, they are not displayed.)
• The following keys are invalidated.
CH • /V, direct tuning button, FLASHBACK, input
However, the keys (input switching and CH • /• keys) of the unit for menu operation remain valid.
None
• In the following case, setting iscancelled and mode is changed to "Variable".
_When the setting of "Input mode start" isset to "Normal".
5-19