Sharp 52LE920UN, 60LE920UN service manual On Setting Items

LC-52LE920UN/LC-60LE920UN

5.On Setting Items

*"EZ-SETUP" discussed below indicates "EZ-SETUP after the first power-on".

1) POWER ON FIXED

Selection

Selection

between

"Variable" and

"Fixed"

(loop provided)

Default

- (Variable)

Explanation

In "Fixed"

setting,

the power-off by the power key of the unit

is invalidated

and the image

is kept being

received.

The power can

be turned off by stopping the power supply from AC.

Limit in Setting

Refer to the "Power-On

Fixed" sheet.

Exception

None

Remarks

• In "Variable"

setting,

the power operation

is in wait for 1 sec. and then turned

off when

the main

power switch

is off.

2) MAXIMUM VOLUME

Selection

Adjustment

from 0 to 60 (no loop)

Default

60

Explanation

Sound

volume

can not

be adjusted

higher

than the

preset value.

Limit in Setting

• When

the sound

volume is set lower than 59, only

figures

are displayed

and

the sound

volume

bar

is not displayed.

• The maximum sound volume for ON-timer (Wake up timer) is limited also to the preset value.

Exception

Remarks• When the sound volume is set higher than the MAX setting by the adjusting process, the sound volume control operation is prohibited for turn-up and the sound volume should be turned down to MAX in this state.

3) VOLUME	FIXED
Selection	Selection	between "Variable", "Fixed", "ACON	(AC CTRL)" and "AC/RCON (AC/RC CTRL)" (loop provided)
Default	Variable
Explanation	• FIXED:	Fixed at the level adjusted for a fixed	volume.

•AC CTRL: Start-up at the level specified for a fixed volume at ACON.

•AC/RC CTRL: Start-up at the level specified for a fixed volume at start.

Limit in Setting	• The sound volume for		the ON-timer	(Wake up timer)		is fixed also without display of menu. Besides, the setting is made
	impossible. (Basically, the menu is not displayed.)
	• The following keys become invalid:
	• Sound volume Up/Down (VOL +!-) [for both remote control and the unit]
	• Mute (MUTE)
Exception	• In the	item "VOLUME"	of adjustment	process,	the sound		volume can	be set freely	irrespective of this setting.
Remarks	• As for	sound volume fixing and sound volume			MAX	level,	the sound	volume fixing	has priority.

•Once the sound volume has been changed by adjustment process, it should be set back to the sound volume preset by sound volume fixing level when the adjustment process ends.

4)VOLUME FIXED LEVEL

Selection	Adjustment	from 1 to 60 (no loop)
Default	20
Explanation	The sound	volume	to be fixed	by "Volume		fixed" is determined.
Limit in Setting	None
Exception	None
Remarks	Setting is valid only		when "Volume		fixed"	is selected for "fixed".
5) RC BUTTON
Selection	Selection	between	"Respond",	"No	Respond" and "Limited" (loop provided)
Default	Respond
Explanation	Making the remote		controller	settings.

•At the "No Respond" setting, the remote controller keys are disabled. Its power key (reception/standby key) is disabled too.

•At the "Limited" setting, some channel-related keys alone are operative. All the other remote controller keys (power, volume

•! V, channel • ! V, light control (brightness sensor), broadcast select) are inoperative.

Limit in Setting	_ In "No respond"		setting,	all the	keys (including		the power	key) are not accepted.
Exception	• Adjustment	process, inspection			process	and hotel only keys are valid irrespective			of setting.
	• All the keys	can	be used	in adjustment		process,	inspection	mode and hotel menu	irrespective of setting.
Remarks

5-17