LC-52LE920UN/LC-60LE920UN
LED flashing timing chart atthe time of anerror
100ms 400ms 1.6sec
1) Inverter/Lamp failure details (Flashes slowly once and flashes fast) Note
Center icon LED operationError type
Lamp failure
Flashes fast once
H: On
L: Off
Pins are monitor microcomputer pins unless other-
wise specified.
ERR_PNL(40pin): Hi failure. Confirmed after 8consecu-
tive detections at 64msec intervals (detected only when
the backlight ison).
Note that after fivedetection counts, the lamp cannot be
activated except in the monitor process.
Accumulated counts are cleared to 0by the setting in the
process A.
2) Power failure details
Error type
SM POW
Main 13V failure
Flashes fast twice
D POW
Digital 3.3V failure
Flashes fast3 times
PANEL POW
Panel 12V failure
Flashes fast5 times
Flashes slowly twice and flashes fast)
Center icon LED operation
H: On
rq_q I
L: Off
H: On
R FLY[
L: Off
H: On
_ R_ RTL F1
L: Off
Note
Pins are monitor microcomputer pins unless other-
wise specified.
DET_13V(38pin) failure (L). Main 13Vis not applied.
Iferror isdetected during start-up or operation, the power
is turned on again by polling.
DET_D3V3(36pin) failure (L). Digital 3.3V is not applied.
Iferror isdetected during start-up or operation, the power
is turned on again by polling.
DET_PNL12V(35pin) failure (L). Panel power isnot
applied.
Detection isstarted after turning onthe panel power and
receiving command; thepower isturned off by polling.
3) Communication failure details (Flashes slowly 3times and flashes fast) Note
Error type
Initial communica-
tion reception failure
Flashes fast once
Start-up confirma-
tion reception failure
Flashes fast twice
Regular communica-
tion failure
Flashes fast3 times
Other communica-
tion failure
Flashes fast5 times
Center icon LED operation
H: On
L: Off
H: On
FLR
L: Off
H: On
F1 RTI
L: Off
H: On
_HIq RZI
L: Off
Basically, debug print logs are analyzed orcommu-
nication logsare analyzed by abus monitor.
Initial communication from the main CPU isnot
received. (Request for the monitor model No. is not
received.)
-->Communication line failure or main CPUstart-up fail-
ure
Start-up reason confirmation fromthe main CPU cannot
be received. (Start-up communication until start-up rea-
son notification command is not received.)
-->Main CPU start-up failure or monitor microcomputer
reception failure
Regular communication that is performed at 1second
intervals inthe normal operation is interrupted.
-->Main CPU operation failure or monitor microcom-
puter reception failure
When a request (PM_REQ=H) is sent from the main
microcomputer, the request command isnot output
from the main CPU, etc.
-->Main CPU operation failure or monitor microcom-
puter reception failure
6-16