
LOADING PAPER
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or printing).
● There are many varieties of special paper available on the market, and some cannot be used with this machine. Before using special paper, contact a SHARP service center.
● Before using other than SHARP recommended paper, make a test copy to | 2 | ||
see if the paper is suitable. | |||
| |||
LOADING THE PAPER TRAY |
| ||
Note | Make sure that the paper is not torn, is free of dust, and has no wrinkles |
| |
or curled edges. |
| ||
|
| ||
1 Raise the handle of the paper tray |
| ||
and pull the paper tray out until it |
| ||
stops. |
|
2Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down on the pressure plate of the paper tray.
3Store the pressure plate lock which has been removed in step 2. To store the pressure plate lock, rotate the lock to secure it as shown below.
Pressure plate lock
19