SET UP THE SOFTWARE

5Double-click the "setup" icon ( ).

If the language selection screen appears after you double click the

Note "setup" icon, select the language that you wish to use and click the "Next" button. (Normally the correct language is selected automatically.)

6

7

The "SOFTWARE LICENCE" window will appear. Make sure that you understand the contents of the software licence, and then click the "Yes" button.

Read the "Readme First" in the "Welcome" window and then click the "Next" button.

To set the IP address of the machine, follow the steps below. If the

Note machine is already connected to the network and its IP address has been set, go to "LPR (TCP/IP) direct printing" (p.50).

Set the IP Address

This setting is only required once when using the machine on a network.

8Click the "Set the IP Address" button.

48