INSTALLING THE SOFTWARE

• If you need to use a different connection method after installing the

Note software using a USB or network connection, you must first uninstall the software (p.79) and then install it using the new connection method.

•In the following explanations it is assumed that the mouse is configured for right hand operation.

•The scanner feature only works when using a USB cable.

•If an error message appears, follow the instructions on the screen to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.

•When installing Sharpdesk, a minimal version of Internet Explorer 5.01 will be installed on your computer if your computer does not currently have Internet Explorer version 4.01 or later.

Using the machine with a USB connection

1The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding.

If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable.

Note

The cable will be connected in step 15.

2

3

Insert the CD-ROM into your computer's CD-ROM drive.

Click the "start" button, click "My Computer" ( ), and then double-click the CD-ROM icon ( ).

In Windows 98/Me/2000, double-click "My Computer", and then double-click the CD-ROM icon.

4Double-click the "setup" icon ( ).

If the language selection screen appears after you double click the

Note "setup" icon, select the language that you wish to use and click the "Next" button. (Normally the correct language is selected automatically.)

5

6

The "SOFTWARE LICENCE" window will appear. Make sure that you understand the contents of the software licence, and then click the "Yes" button.

Read the "Readme First" in the "Welcome" window and then click the "Next" button.

42