TROUBLESHOOTING AND MAINTENANCE
A:Misfeed in the paper feed area
1 Gently remove the misfed paper from the paper feed area as shown in the illustration. If the error indicator blinks and the misfed paper is not visible in the paper feed area, pull out the paper tray and remove the misfed paper. If the paper cannot be removed, proceed to "B: Misfeed in the fusing area".
The fusing unit is hot. Do not touch the fusing unit when Warning removing misfed paper. Doing so may cause a burn or other
injury.
• Do not touch the surface of the drum (green portion) of the drum 
Caution cartridge when removing the misfed paper. Doing so may damage
the drum and cause smudges on copies.
•If the paper has been fed through the bypass tray, do not remove the misfed paper through the bypass tray. Toner on the paper may stain the paper transport area, resulting in smudges on copies.
2Close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up.
B:Misfeed in the fusing area
1 Lower the fusing unit release | Fusing unit release lever |
lever. |
|
8
81