TROUBLESHOOTING AND MAINTENANCE

Problem

Cause and solution

Page

 

Copying or printing is performed.

 

 

→ Set the paper size after copying or

-

 

printing is complete.

 

Paper size for a paper

 

 

The machine has stopped temporarily

 

tray cannot be set.

due to running out of paper or a

 

 

misfeed.

23, 80

 

→ Load paper or remove the misfeed, and

 

 

then set the paper size.

 

 

 

 

 

"MEMORY FULL, PRESS START TO

 

 

RESUME." appears in the display.

 

 

→ The memory became full during sort.

34

A copy job stops before

Copy only the originals that have been

 

it is finished.

scanned to that point, or cancel the job

 

 

and clear the data from memory.

 

 

 

 

 

The tray is out of paper.

19

 

→ Load paper.

 

 

 

 

 

 

Other indicators are lit.

 

 

→ If other indicators are lit, the machine is

 

 

in preheat mode. Press any key on the

17

 

operation panel to resume normal

 

The power save

operation.

 

indicator is lit.

Only the power save indicator is lit.

 

 

→ If only the power save indicator is lit, the

 

 

machine is in auto power shut-off

17

 

mode. Press the [START] key ( ) to

 

 

resume normal operation.

 

 

 

 

Error indicator ( ) is

See "DISPLAY MESSAGES" to check

 

the meaning of the error indicator and

71

lit or blinking.

error message in the display, and take

 

 

appropriate action.

 

 

 

 

 

The underside of the RSPF is dirty

 

Copies made using the

→ Clean the underside of the RSPF

88

RSPF are dirty.

(especially areas where black lines

 

 

appear).

 

 

 

 

 

The same power outlet is used for the

 

 

lighting fixture and the machine.

 

Lighting fixture flickers.

→ Connect the machine to a power outlet

-

 

which is not used for other electric

 

 

appliances.

 

 

 

 

76