REDUCTION/ENLARGEMENT/ZOOM
Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [
] key ( 
) and [
] key ( 
) can be pressed to select the ratio in increments of 1%.
1
2
3
Check the original and paper size, and place the original(s).
Press the [COPY RATIO] key. | COPY RATIO |
| - 100% + |
Press the [COPY RATIO] key and/or [
] key ( 
) or [
] key ( 
) to select the desired copy ratio and then press the [ENTER] key.
Selecting a preset ratio
The preset ratios change as follows each time the [COPY RATIO] key is pressed:
"100%" → "78%" → "64%" → "50%" → "25%" → "400%" → "200%" → "129%".
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in increments of 1%.
Use the [
] key ( 
) or the [
] key ( 
) for fine adjustment.
8.5x14 TO 8.5x11 - 78% +
ZOOM
- 99% +
• To return the ratio to 100%, press the [COPY RATIO] key until 100%
Note appears.
•Press the [COPY RATIO] key to set the approximate ratio, then press
the [
] key ( 
) or [
] key ( 
).
•To decrease or increase the zoom ratio rapidly, hold down the [
]
key ( 
) or [
] key ( 
).
The ratio will stop changing at each of the preset ratios. To continue changing the ratio, release the key and then hold it down again.
4Select the number of copies and any other copy settings, and then press the [START] key ( 
).
The copy will be delivered to the paper output tray.
28