Sharp AR-203E Sheet Paper Feed Unit AR-D33, Using the paper feed unit with the printer function

250-SHEET PAPER FEED UNIT (AR-D33)

The paper feed unit provide the convenience of increased paper capacity for the unit and a greater choice of paper size readily available for copying.

The procedures for loading paper in the paper tray of paper feed unit, changing the paper size, and selecting the paper tray are same as for the paper tray in the unit. See "LOADING THE PAPER TRAY" (p.8) and "Selecting the tray" (p.19).

Tray Lower side cover

Using the paper feed unit with the printer function

The AR-D33 can also be used with the printer function. To use the AR-D33 with the printer function, follow these steps to adjust the settings in the printer driver.

The printer driver cannot be set for use with the AR-D33 when opened from the application.

1

2

3

4

5

Click the "start" button.

Click "Control Panel", select "Printer and Other Hardware", and then click "Printer and Faxes".

•On Windows Vista, select "Settings" and click "Printers".

•On Windows 98/Me/2000, select "Setting" and click "Printers".

Click the "SHARP AR-xxxx" printer driver icon and from the "File" menu select "Properties".

•On Windows Vista, click the "SHARP AR-xxxx" printer driver icon and select "Properties" from the "Organize" menu.

•On Windows 98/Me, click the "SHARP AR-xxxx" printer driver icon, select "Properties" from the "File" menu, and then click the "Setup" tab.

Click the "Utility" tab.

Select "Two trays" for "Input tray option", and click "OK".

The printer driver closes. This completes the settings needed to use the AR-D33.

60