Sharp CV-P09LX, CV-P10LC, CV-P10MX, CV-P12LX HOW TO USE THE REMOTE CONTROL, CAUTION, when not in use, To prevent the remote control from, being misplaced, hook it to the unit

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the units signal receiver window and press the desired button. A beep will sound when the unit receives the signal.

•Make sure nothing, such as curtains, blocks the signal receiver window.

•The remote control operates up to 23

feet (7 meters) away.

CAUTION

•Do not expose the signal receiver window to direct sunlight. This may adversely affect its operation. If necessary, close the curtains to block out the sunlight.

•Use of a fluorescent lamp in the same room may interfere with transmission of the signal.

•The unit may be affected by signals emitted from other remote controllers for televisions, VCRs or other equipment used in the same room.

•Do not leave the remote control exposed to direct sunlight or near a heater. Pro- tect the remote control from moisture and shock which can discolor or damage it.

To prevent the remote control from
being misplaced, hook it to the unit
when not in use.
When attached, to remove the remote	Remote control hook
control from the unit, lift the remote
control up slightly and pull it out.

ENGLISH

E-19