MAIN UNIT OPERATION
Use this mode when the remote control is not available.

1

Press the POWER button on the unit.

 

• The red OPERATION lamp on the unit will

1

light.

• If the unit has not been unplugged since it was

last operated, it will resume operation at its

last settings.

• If the unit has been unplugged since it was last operated, it will resume operation in the cooling mode, set at 68˚F. The fan speed set to AUTO.

TO TURN OFF

Press the POWER button again.

• The red OPERATION lamp on the unit will turn off.

NOTES:

•Upon starting MAIN UNIT operation, the drainage pump inside the unit runs for about a minute, which may produce an audible gurgling sound.

E-28