Sharp CV-P09LX, CV-P10LC, CV-P10MX, CV-P12LX ON TIMER, tings, later, ENGLISH, TO CANCEL TIMER, Press the CANCEL button, Press the ON TIMER button, Display shown when you set, the unit to turn on 6.5 hours

ON TIMER

The unit will turn on automatically according to your setting.

Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour (30-minute) increments and from 10 to 12 hours, in 1-hour increments.

Point the remote control at the signal receiver window on the unit.

1	Press the ON TIMER button.
	• The time setting will change as you press the button
	as follows.
		0.5h	1.0h	1.5h	10h	11h	12h
	Hold the button down to speed through the set-
1	tings.
	• The orange TIMER lamp on the unit will light.

• The unit will emit a beep when it receives the signal.

• The time setting will count down to show the remaining time.

Select the mode, temperature, fan speed setting and PLASMACLUSTER operation as desired.

•When the temperature is set with the ON TIMER, the temperature will show in the display for 5 sec- onds and then return to the time display.

•If you do not change the setting, the unit will operate using the most recent setting.

Display shown when you set
the unit to turn on 6.5 hours	TO CANCEL TIMER
later.

Press the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

ENGLISH

E-27