Sharp CV-P09LX, CV-P10LC, CV-P10MX, CV-P12LX COOL MODE, "CLOSE" position, Press the POWER button again, 1 Press the MODE button to select COOL mode, 2 Press the POWER button to start op- eration

COOL MODE

Drainage nozzle

"CLOSE" position

Stopcock

Install the exhaust hose (See Page16), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock.

1 Press the MODE button to select COOL mode.

COOL DEHUM FAN VENT

2

3

1

4

2 Press the POWER button to start op- eration.

•The red OPERATION lamp on the unit will light.

3 Press the TEMPERATURE button to set the desired temperature.

•The temperature can be set within the range of 64°F to 86°F.

4 Press the FAN button to set the desired fan speed.

AUTO QUIET LOW HIGH

TO TURN OFF

Press the POWER button again.

•The red OPERATION lamp on the unit will turn off.

E-20