18
Useful Features (Continued)
RotateYou can set the orientation of the picture.
Press MENU to display the Menu screen.
Press \/| to select “Setup”.
Press '/" to select “Rotate”, and press OK.
Press '/" to select the desired mode, and press OK.
Normal
Mirror
Rotate
Upside down
Press END to exit.
■ Directly setting the Rotate
Press ROTATE to select the desired mode.
•Each time you press ROTATE, the mode changes as follows.
NOTE
•“Rotate” is set to “Normal” at the factory setting.
[Upside down]: To display upside
down images for special uses.
[Rotate]: To display rotated
images for special uses.
[Mirror]: To display mirror
images for special uses.
[Normal]: Normal image
orientation.
Rotate: Upside down
Rotate: Normal Rotate: Mirror
Rotate: Rotate
2
3
5
4
Using the Programme TableThe Programme table shows a list of all receivable pro-
grammes. They are located in channels 0 to 199.
To select the desired programme
Press OK to display the Programme table.
Press '/"/\/| to select the desired programme.
•To display the next or previous list of the Programme table,
press '/" when the cursor is at a programme in the lower-
right or upper-left position, or press \/| when the cursor is
at a programme in the right or left column.
8 E- 9 16 E- 54
1 S- 6 9 E- 1 17 E- 56
2 S- 8 1 E- 11 18 E- 57
3 S- 1 11 E- 36 19
4 S- 11 12 E- 37 2
5 E- 3 13 E- 38 21
6 E- 5 14 E- 5 22
7 E- 6 15 E- 53 23
0
0
0
0
0
0
Press OK to display the selected programme.
Press END to exit.
1
3
4
2
1
LC-13_15_20SH1E_E_P15-18.p65 04.10.25, 11:06 AM18