Sharp LC-15SH1E, LC-13SH1E, LC20SH1E operation manual Basic Operation

Basic Operation

Turning On and Off the Main Power		Switching the Input Mode (EXT1/EXT2/TV)
	(MAIN POWER)

STANDBY/ON indicator

●Press (MAIN POWER).

¥The STANDBY/ON indicator instantly changes from red to green and the LCD TV set is turned on.

¥The on-screen display appears for a few seconds after turning on the main power.

On-screen display

1S - 6

●To turn off the main power, press (MAIN POWER) again.

STANDBY/ON

To turn off the LCD TV

Press B (Power).

¥ The STANDBY/ON indicator will turn red.

To turn the LCD TV back on

Press B (Power) again.

¥ The STANDBY/ON indicator will turn green.

1 Turn on the power of the connected devices.

2 Press	(	)/(	) (Input) to select the applicable
input source.
¥ The screen changes in order of EXT1, EXT2 and TV mode
each time		(	)/( ) (Input) is pressed.

EXT1 mode

E X T 1

EXT2 mode

E X T 2

TV mode

1 S - 6

NOTE

¥EXT1: Select this mode when viewing the signals from the video equipment connected to the EXT1 (21-pin Euro-SCART (RGB)) terminal.

¥EXT2: Select this mode when viewing the signals from the video equipment connected to the EXT2 terminals using the VIDEO or S-VIDEO terminal for video input.

If both VIDEO and S-VIDEO terminals are connected with cables, the S-VIDEO input terminal is selected as the high priority.

10

LC-13_15_20SH1E_E_P10-14.p65 10 04.10.8, 4:33 PM