![](/images/new-backgrounds/1311554/31155435x1.webp)
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the (Power) button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic settings proceed automatically and subsequently:
1 Press the POWER button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed.
Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed.
2Press the or
buttons to select “Shop” or “Home”,then the ENTER button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side panel of the TV for five seconds to return to Dynamic (Home) mode.
3Press the ENTER button to enter the language. Press the or
button to select language, then the
ENTER button.
“Select the antennas to memorize” menu is automatically displayed.
4Press the or
button to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected to ANT 1 IN (CABLE), select “Cable”.
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select “Air + Cable”. In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the or
button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your particular area.
continued...