4Press the 
or 
button to select the Antenna connection, then press the ENTER button.
•Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”.
If you want to select another type of cable system,
press the 
or 
button to select “STD”, “HRC” or “IRC”.
•If you have Digital cable, select the signal source for both Analog and Digital.
•STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
5Press the ENTER button to start the auto program. The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the memorization process.
Select “Return” by pressing the 
or 
button, then press the ENTER button to return to the previous menu. Press the EXIT button to exit.
•The TV must be connected to air/cable in order to receive digital TV signals. Even if a particular channel is deleted from the memory,
you can always tune to that channel directly by using the number buttons on the remote control.
•When connecting Digital Cable to a
To view the STB on your TV, select the Input jack the STB is connected to with the SOURCE button on the remote control. (see page 35)
All available DTV and analog channels are automatically stored in memory.
