Samsung HL-S5686C manual Viewing the Control Panel, Buttons on the Lower-Right Part of the Panel

Viewing the Control Panel

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

SPEAKERS

(POWER)

Press to turn the TV on and off.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

INDICATOR LIGHTS

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, AV3, S-Video1, S-Video2, S-Video3, Component1, Component2, HDMI1, HDMI2).

MENU

Press to see an on-screen menu of your TV’s features.

: Light is On / : Light is Blinking / : Light is Off

– VOL +

Press to increase or decrease the volume.

In the on-screen menu, use the – VOL + buttons as you

would use the and	buttons on the remote control.
CH
Press to change channels.
In the on-screen menu, use the		CH	buttons as
you would use the	and buttons on the remote
control.
(ENTER)

Press to confirm a selection.

STAND BY/TEMP TIMER LAMP Indication

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the rear of the set is not properly shut.

Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

•It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

•The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

English-9