Sharp LC-15SH1E, LC-13SH1E Connecting External Devices, Connecting to the EXT1/EXT2 Terminals

Connecting External Devices (Continued)

Connecting to the EXT1/EXT2 Terminals

	Video
	Audio (L)
	Audio (R)
	Audio/Video cable
Camcorder	(commercially available)
	S-Video
	S-Video cable
	(commercially available)

VCR

21-pin Euro-SCART connector (commercially available)

Decoder

21-pin Euro-SCART (RGB)

1.	Audio right output	11.	GREEN input
2.	Audio right input	12.	Not used
3.	Audio left output	13.	Earth for red
4.	Common earth for audio	14.	Earth
5.	Earth for blue	15.	RED input
6.	Audio left input	16.	RED/GREEN/BLUE control
7.	BLUE input	17.	Earth for video
8.	Audio-video control	18.	Earth for RED/GREEN/BLUE control
9.	Earth for green	19.	Video output
10.	Not used	20.	Video input (PAL/SECAM/NTSC)
		21.	Plug shield

NOTE

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

•If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an S-Video cable.)

•When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select EXT2), you can only view pictures from the S-VIDEO terminal.

•You cannot view multiple or synthesised pictures by connecting two or more external devices. When connecting an external device, make sure to connect the video and audio cables to the corresponding terminals.

28

LC-13_15_20SH1E_E_P27-28.p65 28 2004.10.22, 2:09 PM