18
Watching TV
ANALOG/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
ANALOG: Press to switch to analogue mode.
After switching from DTV, radio or
external input mode to analogue mode,
the TV jumps to the most recently
viewed analogue channel.
DTV: Press to switch to DTV mode. After
switching from analogue, radio or
external input mode to DTV mode, the
TV jumps to the most recently viewed
DTV channel.
RADIO: Press to switch to radio mode. After
switching from analogue, DTV or
external input mode to radio mode, the
TV jumps to the most recently tuned
radio channel.

When you watch the TV for the first time

When the TV powers on for the first time after purchase,
perform the auto installation.

Analogue TV

You can run the auto installation to set channels
automatically.
1
2
After setting the channels, you can select a
channel using CH r/s or 0-9 on the
remote control unit. (See page 15.)
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 21.)

DTV

When the TV accesses to DTV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1
2
After setting the channels, you can select a
channel using CH r/s or 0-9 on the
remote control unit. (See page 15.)
To watch DTV broadcasts, select “Auto
Search” from Installation menu. (See page
35.)
LC-GD7X_E-e 06.9.29, 11:32 AM18