Sharp LC-46GD7X, LC-52GD7X Auto installation Programme setup, Basic adjustment settings Analogue

Basic adjustment settings (Analogue)

Auto installation Programme setup

You can run auto installation again, even after setting up the preset channels.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/bto select “Auto Installation”, and then press ENTER.

MENU [Setup ... Auto Installation]

Setup Option

Auto Installation

Programme Setup
Child Lock
Speaker Setup
Input Skip
Position
WSS	[On]
4:3 Mode	[Panorama]
Standby Mode	[Mode1]
Language	[English]
Text Language	[West Europe]
Identification
Reset

4 If you have already set the password, enter it here. If not, enter the factory preset password “1234”.

•See page 39 for setting a password.

–– – –

5	Press c/dto select “Yes”, and then press
	ENTER.

6 Press a/b to select the desired language listed on the screen, and then press ENTER. After this setting, auto search starts with the following order.

1Programme auto search

2Auto labelling

3Auto sorting

You do not need to do anything during the auto search.

NOTE

•After performing step 6, the menu screen shown in step 3 will reappear. Do not turn off the TV before then, because the TV is saving the data found.

You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually.

Auto search

You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/b to select “Programme Setup”, and then press ENTER.

If you have already set the password, enter it here. If not, enter the factory preset password “1234”.

• See page 39 for setting a password.

MENU [Setup ... Programme Setup]

Setup Option

		Auto Installation
		Programme Setup
		Child Lock
		Speaker Setup
		Input Skip
		Position
		WSS	[On]
		4:3 Mode	[Panorama]
		Standby Mode	[Mode1]
		Language	[English]
		Text Language	[West Europe]
		Identification
		Reset
4
	Press a/bto select “Auto Search”, and then
	press ENTER.

5 Press c/dto select “Yes”, and then press

ENTER.

•Auto search starts with the following order. 1Programme auto search

2Auto labelling

3Auto sorting

NOTE

•After performing step 5, the menu screen shown in step 3 will reappear. Do not turn off the TV before then, because the TV is saving the data found.

21