Menu operations
Miscellaneous
ENo signal off
When set to “Enable” the TV will automatically enter the standby mode if there is no signal input for 6 minutes.
TV menu
Miscellaneous | Channels | Child lock |
|
|
|
|
|
|
No signal off | Enable Disable |
|
|
| |
Time and date |
|
|
Geometry menu
You can set the geometry values of the picture such as picture position and phase relation. The adjustments are stored independently for each input mode.
TV menu
| Geometry | Picture |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Picture horizontal | 0 |
|
|
|
|
|
|
|
|
|
|
| ||
| Picture vertical | 0 |
|
|
|
|
|
|
|
|
|
|
| ||
| Phase position | 0 |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
•When a TV programme fi nishes, this function may not operate.
•This function is not available in DTV mode.
EOn-screen displays
Here you can determine which
Items | Description |
|
|
Sets the duration of the TV status and station | |
time | name display. |
| • This setting also affects other TV screens. |
| (Volume, Surround, etc.) |
|
|
Sound mode | Sound mode display on/off (“yes”/“no”) |
|
|
Time | Time information display on/off (“yes”/“no”) |
|
|
ETime and date
When you receive teletext, the correct date and time setting is picked up automatically by the set.
If you do not receive teletext, you should set the “Date” and “Time” manually. Also you have additional items you can adjust as outlined below.
NOTE
•Time and date information confi gured manually cannot be overridden automatically by the set.
•If the power to the set is cut off (disconnection of AC cord, power outage, etc.), the auto time acquisition mode through teletext reactivates.
Items | Description |
|
|
Time | If you receive a station with teletext after |
| switching on your TV set, the time and date are |
| automatically registered. In the case of some |
| stations, the date may have to be entered |
| manually. For stations without teletext, enter the |
| time (00:00 to 23:59) and the date (day.month. |
| year) using the numeric buttons on the remote |
| control. |
|
|
Date | See the above item “Time”. |
|
|
Beginning of | Enter the date for the beginning of daylight- |
saving time if it deviates from the date | |
time | calculated automatically. |
|
|
End of daylight- | Enter the date of the end of |
saving time | time if it deviates from the date calculated |
| automatically. |
|
|
Picture horizontal
Sets the horizontal picture position by moving the picture left and right.
Picture vertical
Sets the vertical picture position by moving the picture up and down.
Phase position | PC only |
Adjusting the phase relation ensures a picture without fl icker and noise. (Available only for RGB signal)
21
