6
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd
any chemical leakage, wipe thoroughly with a cloth.
• When replacing the batteries, use alkaline batteries instead of manganese ones.
• Do not overuse the light-up function by using LIGHT D button, doing so may shorten the battery life. Replace
the batteries when the light on LCD window or light-up function become weak or blurry.
• Do not continue to use the remote control unit with batteries running low. This may
result in error message or malfunction. Should this happen replace the batteries and
leave it unused for a while. Otherwise, you may open the rear battery cover and press
the RESET button. When you press the RESET button, your Universal remote control
settings will be deleted.
• The remote control unit has a internal memory of external devices. In order not to lose the data,
replace the batteries quickly. If the manufacturer code is initialised and lost, you can input the
manufacturer code again. (See page 37.)
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Quick guide
30° 30° Remote control
sensor
Press and slide the battery cover to open it.
Insert two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
Close the battery cover.
1
2
3
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Using the remote control unitCautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an
area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may
cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the
TV is under direct sunlight or strong lighting. In such case, change the angle of the
lighting or TV, or operate the remote control unit closer to the remote control sensor.
5 m
Use the remote control unit by
pointing it towards the remote
control sensor. Objects between the
remote control unit and sensor may
prevent proper operation.
RESET button
LC-52XL1E_gb_a.indd 6LC-52XL1E_gb_a.indd 6 2007/04/25 14:45:342007/04/25 14:45:34