Menu Features and Functions

Picture Menu Contents

3D Settings

Press to view 3D settings.

Mode

You can change the picture mode to suit your preference or requirements. The Picture mode can

be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.

 

Contrast

Sets the lightness and darkness values of the screen.

Brightness

Sets the brightness value for the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save Mode

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

 

 

 

This setting controls the backlight level. The backlight function will be inactive if the Power Save Mode

Backlight

is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture

 

mode is set to Game.

Noise

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to

Reduction

reduce the amount of noise.

Advanced Settings

Dyanmic

You can change the Dynamic Contrast ratio to desired value.

Contrast

 

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the desired picture size from picture zoom menu.

Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage switching.

 

 

 

 

Press Use “Left” / “Right” to set Movie Sense Low, Med, High or Off. While Movie Sense is

 

active, it will optimize the TV’s video settings for motional images to acquire a better quality

 

and readability.

Movie Sense

When Movie Sense option is set to Low, Med or High, Movie Sense demo option will be

 

available. If one of these options is selected and if you press OK button, then the demo

 

mode starts. While demo mode is active, the screen will be divided into two sections, one

 

displaying the movie sense activity, the other displaying the normal settings for TV screen.

HDMI True

While watching from a HDMI source, this feature will be visible in the Picture Settings

Black

menu. You can use this feature to enhance blackness in the picture.

Film Mode

Films are recorded at a different number of frames per second to normal television

programmes. Turn this feature on when you are watching films to see the fast motion

 

scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

RGB Gain

You can configure the colour temperature values using the RGB Gain feature.

Reset

Resets the picture settings to factory default settings.(Except Game Mode)

Autoposition

Automatically optimizes the display. Press OK to optimize.

(in PC mode)

 

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

(in PC mode)

 

V Position

This item shifts the image vertically towards the top or bottom of the screen.

(in PC mode)

 

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive

(in PC mode)

presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the resolution and scan frequency that you input to the TV set, you may see

a hazy or noisy picture on the screen. In such a case you can use this item to get a clear

(in PC mode)

picture by trial and error method.

 

 

 

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.

English - 14 -

Page 15
Image 15
Sharp LC-50LE760E, LC-50LE762EN, LC-50LE761E manual Menu Features and Functions, Picture Menu Contents, Advanced Settings