English - 8 -
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation
of the unit.
• The remote control unit may not work properly if
the remote control sensor of the TV is under direct
sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote
control unit closer to the remote control sensor.
Switching On/Off

To Switch the TV On

Connect the power cord to the mains socket. Switch
the “ ” button on the TV to position “|” so the TV
will switch to standby mode. Then the standby LED
lights up.
To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the “ ” or P/CH+/- button on the TV.
The TV will then switch on.

To Switch the TV to Standby

To switch the TV to low power standby press the “ ”
button on the remote control or on the TV.

To Switch the TV Off

Switch the “ ” button on bottom of the TV to
position 2 as illustrated - , to isolate the TV from
the mains, the LED will go out.