Adjusting the screen display and speaker volume
Adjusting the speaker volume
1.Without the OSD Menu being displayed, press the 
or the 
button.
2.Check that [VOLUME] is selected.
If it is not selected, press the 
/ MODE button and select [VOLUME].
3.Adjust by pressing the 
button (decrease) or 
button (increase).
Note:
-On Screen display for adjustment disappears several seconds after the last operation.
Setting display mode
Color tone or brightness can be changed with one command.
STD
Displays image with the color tone results from original scheme of liquid crystal panel.
OFFICE
Display brightness is lowered. (This mode saves power.)
sRGB
sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission).
Color conversion is made in taking account of liquid crystal's characteristics and represents color tone close to its original image.
VIVID
Displays an image with dynamic and vivid primary colors.
-If [DISPLAY MODE] is set to [sRGB] or [VIVID], [WHITE BALANCE] is set to [STD], and [GAMMA] is set to [0].
How to set
Press the 
/ MODE button when the OSD Menu is not displayed.
Each time the button is pressed the next menu item appears. (STD → OFFICE → sRGB → VIVID
→STD)
On Screen display for adjustment disappears several seconds after the last operation.
Checking product information
A model name (MODEL), a serial no. (S/N), and usage time (USAGE TIME) of the monitor can be checked.
1.Turn the power off.
2.While pressing the 
/ MODE button, press the monitor's power button (i.e. turn the power on). The product information will display.
3.Press the MENU button.
Note:
-Please note that the indication of usage time at purchase may not be 0 (zero), as a result of factory inspection and other activities during manufacture.
20
