Sharp LL-172G, LL-172A Mode SELECT-1 Menu, Mode SELECT-2 Menu, Language, Information, OFF Timer

Adjusting the screen display

MODE SELECT-1 Menu

Note:

-Depending on the resolution of the input signal, even if menu options can be selected, the display may not change.

OSD H-POSITION (OSD horizontal position) The position of the OSD Menu can be moved to

the left and right. ( buttons)

OSD V-POSITION (OSD vertical position)

The position of the OSD Menu can be moved up

and down. ( buttons)

SCALING (Level of scaling)

The sharpness of the image can be adjusted.

( buttons)

Note:

-When the display mode is set to less than

1280 x 1024 pixels, the display is enlarged to cover the whole screen (i.e. the side ratio of the display may change).

400LINES (degree of resolution) (When using an analog signal)

You can specify the horizontal resolution of a 400-

line screen when using US text, etc. ( buttons) 640: 640 x 400 dot mode

720:720 x 400 dot mode (US text etc.)

Note:

-As the resolution input for other than 400 lines is done automatically, there is no need to set it.

LANGUAGE

You can choose the language used in OSD Menu.

1.Press the button.

The Language Selection Menu will be displayed on the screen.

2.Use the / MODE button to choose a language.

3.Press the MENU button.

MODE SELECT-2 Menu

INFORMATION

A model name (MODEL), a serial no. (S/N), and usage time (USAGE TIME) of the monitor can be checked.

1.After selecting [INFORMATION], press the button.

The product information will display.

2.Press the MENU button.

-Please note that the indication of usage time at purchase may not be 0 (zero), as a result of factory inspection and other activities during manufacture.

OFF TIMER

Power is automatically shut off when the set time elapses.

1.After selecting [OFF TIMER], press the button.

2.Set [ON]/[OFF] by pressing the buttons.

If selecting [ON], press the / MODE button and

set the shut-off time by pressing the buttons. (Between 1 and 23 hours may be set, by the hour.)

3.Press the MENU button.

-When [ON] is selected, the remaining time is displayed in the upper right of the screen during the last 5 minutes before the shut-off. (The remaining time is displayed for approx. 5 seconds, on each minute.)

-If the power button is pressed after the first display of the remaining time but before the power shuts off, the OFF TIMER will be set to one hour.

To subsequently turn the power off, press the power button again. (When next turning on power, power is again automatically shut off when the set time elapses.)

-If the monitor is turned on when the [OFF TIMER] is set to [ON], the set time appears on the display for several seconds. (If there is no input signal, [NO SIGNAL] is displayed.)

INPUT-2 [LL-172G]

Set [1LINE] when connecting a digital or analog signal cable to a DVI-I input terminal (INPUT-2). Set [2LINES] when connecting a 2-input cable.

( buttons)

-If the connections and settings are not correctly set, the screen will not be correctly displayed.

24