
Connecting the monitor and turning the monitor on and off
Connecting the monitor to a power source
Power terminal
AC outlet
Power cord
Turning the power on
1.Press the monitor's power button.
2.Turn on the computer.
The power LED will be lit green, and the screen will display an image.
Turn on the computer.
ON
Press power button.
Installing
Depending on the type of computer or OS, you may need to install the monitor
About the ICC profile
An ICC (International Color Consortium) profile is a file that describes the color reproduction characteristics of the LCD monitor. Using an application compatible with an ICC profile, highly accurate color reproduction can be realized.
-Windows 98/2000/Me/XP all use the ICC profile.
-When installing Windows 98/2000/Me/XP set- up information (described below), the ICC profile is also installed. If you would like to install the ICC profile only, please refer to Installing the ICC profile on page 14.
-When using an ICC profile, set [DISPLAY MODE] to either [STD] or [OFFICE], and set [WHITE BALANCE] to [STD].
Notes:
-If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment. (p.17)
-Depending on the type of computer or OS, you may need to install the monitor
Turning the power off
1.Turn the computer off.
2.Press the monitor's power button. The power LED will disappear.
Turn the computer off.
OFF
Press power button.
If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet.
Installing set-up information
For Windows 95
Installing monitor
This explanation assumes that the floppy disk drive is "A drive".
1.Place the Utility Disk (provided) into the computer's A drive.
2.Click on the [Start] button. From [Settings], choose [Control Panel].
3.Double click on [Display].
4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].
5.Click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:] then click [OK].
6.Confirm that the monitor details are selected, and click [OK].
7.Check that the monitor details are displayed, then click [Apply].
8.Click [OK], and close the window.
9.Remove the Utility Disk from the A drive.
12