Sharp LL-E15G1, LL-T15G1 operation manual Adjusting the screen display, Adjusting the backlight

Adjusting the screen display

English

Adjustment the backlight (right column) Brightness of backlight can be adjusted.

Automatic screen adjustment (p.18)

The CLOCK, PHASE, H-POS (horizontal position- ing) and V-POS (vertical positioning) functions can be adjusted automatically.

Manual screen adjustment (p. 19)

Fine adjustments can be made using the On Screen Display (OSD) Menu.

Note:

-All adjustments will be saved even after turning the power off.

Resetting all adjustment values

All adjustment values can be returned to their original ex-factory values in one command.

1.Turn off the monitor power.

2.Press the MENU button and the SELECT button simultaneously, and while doing this press the power button (i.e. turn the power on). When [ALL RESET] appears on the screen, the reset is complete.

3.Turn off the monitor power.

Note:

-While ALL RESET is displayed, the control buttons are disabled.

-It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons.

ADJUSTMENT menu reset

The adjustment values of the analogue signal time’s ADJUSTMENT menu can be returned to their original ex-factory values.

1.Turn on the monitor power.

2.Press the MENU button and the button simultaneously. When [RESET] appears on the screen, the reset is complete.

Adjustment lock function

By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided.

1.Turn off the monitor power.

2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the button until the message appears on the screen.

When the menu is unlocked: [ADJUSTMENT LOCKED] will appear on the screen, and the lock will be set.

When the menu is locked:

[ADJUSTMENT UNLOCKED] will appear on the screen, and the lock will be removed.

Note:

-When the lock is in place, all buttons other than the power button are disabled.

Adjusting the backlight

1.Without the OSD Menu being displayed, press the button or the button.

B R I G H T 3 1

2.Adjust by pressing the button (darker) or the button (lighter).

The BRIGHT bar automatically disappears several seconds after the last command.

17