Sharp MX-3500N manual TRAY SETTINGS FOR TRAYS 1 TO, Loading Paper, Pull out the paper tray

TRAY SETTINGS FOR TRAYS 1 TO 4

LOADING PAPER

A maximum of 500 sheets of paper from size A5R to size A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded in trays 1 and 2. A maximum of 500 sheets of paper from size B5R to size A3 (7-1/4" x 10-1/2"R to 11" x 17") can be loaded in trays 3 and 4. For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "Paper Tray Settings" in the System Settings Guide.

Pull out the paper tray.

Gently pull the tray out until it stops.

1

Fan the paper.

Before loading the paper, fan it well. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.

2

3

4

	Insert the paper into the tray.
Indicator	Insert the paper with the print side face up.
line	However, letterhead and pre-printed paper should be inserted
	with the print side face down.
	The paper stack must not be higher than the indicator line (no
	more than 500 sheets).

If "Disabling of Duplex" is enabled in the system settings (administrator), insert letterhead and pre-printed paper with the print side face up.

Gently push the paper tray into the machine.

Push the tray firmly all the way into the machine.

When loading paper, if you change the paper size from an inch size to an AB size, or from an AB size to an inch size, or if you change the paper type, be sure to change the paper type setting as explained in "Paper Tray Settings" in the System Settings Guide.

Do not place heavy objects on the tray or press down on the tray.

23