Sharp MX-3500N manual Peripheral Devices, Product name, Product number, Description

4 PERIPHERAL DEVICES

This chapter describes the peripheral devices that can be used with the machine and explains how to use the finisher and saddle stitch finisher.

PERIPHERAL DEVICES

Peripheral devices can be installed on the machine to increase its range of functionality.

The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.

		(As of November, 2005)
Product name	Product number	Description
Original cover	MX-VRX1*1	This holds down the original.
Reversing single pass feeder	MX-RPX1*1	This automatically turns the original over to enable scanning of
(Automatic document feeder)		both sides.
Stand/1x500 sheet paper drawer	MX-DEX1*2
	MX-DEX3*3	Additional tray. A maximum 500 sheets of paper can be loaded
Stand/2x500 sheet paper drawer	MX-DEX2*2	in each tray.
	MX-DEX4*3
		Additional tray. A maximum of 3500 sheets of paper can be
Large capacity tray	MX-LCX1	loaded in the tray.
		To install the tray, a stand/1 x 500 sheet paper drawer or
		stand/2 x 500 sheet paper drawer is required.
Exit tray unit	MX-TRX1*2	This can be added to the right side of the machine.
(Right tray)
	MX-TRX2*3
Finisher	MX-FNX1	Output device that enables the use of the staple function and
		offset function.
	MX-PNX1A
Punch module	MX-PNX1B	Punches holes in copies and other output. Requires a finisher.
	MX-PNX1C
	MX-PNX1D
		Output device that enables use of the staple function, offset
Saddle stitch finisher	MX-FNX2	function and pamphlet copy function.
		To install the saddle stitch finisher, a stand/1 x 500 sheet paper
		drawer or stand/2 x 500 sheet paper drawer is required.
Paper pass unit	MX-RBX1	Required when a saddle stitch finisher is installed.

38