Sharp MX-3500N Important Points When Using The Bypass Tray, Inserting paper, Inserting tab paper

	Paper Select
		A4	Plain
8		A4R	Plain
		B4	Plain
		A3	Plain

OK

A4

Recycled

(1)(2)

Select the bypass tray.

(1)Touch the paper size key of the bypass tray.

(2)Touch the [OK] key.

Do not place heavy objects on the bypass tray or press down on the tray.

IMPORTANT POINTS WHEN USING THE BYPASS TRAY

•When using plain paper other than SHARP standard paper or special types of paper other than SHARP-recommended transparency film, or are printing on the reverse side of previously used paper, the paper must be loaded one sheet at a time. Loading more than one sheet at a time will cause misfeeds.

•Before loading paper, straighten any curling in the paper.

•When adding paper, remove any paper remaining in the tray, combine it with the paper to be added, and reload as a single stack. If paper is added without removing the remaining paper, a misfeed may result.

•When using glossy paper, set the paper type to [Heavy Paper]. This will bring out the glossy quality of the paper.

Inserting paper

A5, 7-1/4" x 10-1/2" or less size paper must be inserted in the horizontal orientation as shown at left.

Inserting tab paper

When copying on tab paper, orient the paper so that the side with the tabs enters the machine last. The bottom side of the inserted paper will be printed on.

Place the tab paper and original as shown below.

	Original	Tab paper		Copy
Automatic document feeder		Document glass
			5	1
Leading edge	1		4
		Paper feed		2
of original	2		3	3
		direction	2
	3			4
	4		1	5
	5

When copying onto tab paper, insert the tab paper with the side to be copied on face down in the bypass tray.

Face down

Use only tab paper that is made of paper. Tab sheets made of film or other material cannot be used.

30