Sharp MX-M502N Bypass tray, Duplex module, Output tray Centre tray, Interface port, Dimensions

SPECIFICATIONS

Machine specifications / copier specifications (Continued)

	Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
	8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
	7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size
	detection function. Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is
	possible.)
	Paper weights:
Bypass tray	Thin paper (56 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)), plain paper (60 g/m2 to 105 g/m2 (16 lbs. to
	28 lbs.)), heavy paper (106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs. index)),
	envelopes (75 g/m2 to 90 g/m2 (20 lbs. to 24 lbs.))
	Paper capacity: Standard paper 100 sheets
	Paper types:
	SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper,
	transparency film, labels, tab paper, envelopes (Monarch, Com-10, DL, C5)
	Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
Duplex module	8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR
	Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)), heavy paper (106 g/m2 to
	209 g/m2 (28 lbs. bond to 110 lbs. index))
	Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper
	Output method: Face-down output (A3W and 12" x 18" paper can be output to right tray, finisher, or
	saddle stitch finisher)
1	Output capacity: 400 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
Output tray (Centre tray)*	(The maximum number of sheets that can be held varies depending on ambient conditions in the
	installation location, the type of paper, and the storage conditions of the paper.)
	Tray full sensor: Yes
	LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
	USB connectivity: Type A connector supports USB 2.0*2
Interface port	Compatibility requirements of USB memory
	Memory capacity : Max. 32 GB
	Disk Format	: FAT32 only
	Type B connector supports USB 2.0 (Hi speed)
Required power supply	Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of
	the left side of the machine.)
Power consumption	1.84 kW (220-240 V) / 1.44 kW (100-127 V)
	645 mm (W) x 695 mm (D) x 953 mm (H) (25-25/64" (W) x 27-3/8" (D) x 37-33/64" (H)) (With the
Dimensions	reversing single pass feeder installed)
	645 mm (W) x 695 mm (D) x 833 mm (H) (25-25/64" (W) x 27-3/8" (D) x 32-51/64" (H)) (With the
	document cover installed)
Weight	Approx. 95 kg (209.4 lbs.) (With the reversing single pass feeder installed)
	Approx. 88 kg (194.0 lbs.) (With the document cover installed)
Overall dimensions	986 mm (W) x 695 mm (D) (38-53/64" (W) x 27-3/8" (D)) (when bypass tray is extended)

*1 Output tray (Centre tray) cannot be used when the finisher or saddle stitch finisher is installed.

*2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors).

Do not use the connectors simultaneously.

When a keyboard is not connected (MX-KBX2), only one connector can be used; simultaneous use is not possible. If you need to change the connector that is used, contact your service technician.

To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed 500 mA.

46