46

6

Audio Output Type Setting

This function determines wh ether the audio level output from the AUDIO output ( MONITOR output) terminal is fi xed or variable by linking with VOLUME.
Selectable
items Description
FAO
(Fixed Audio
Output)
Audio output that does not var y in
strength with the volume level of the
source projector.
VAO
(Variable
Audio
Output)
Audio output that varies in stre ngth
with the volume level of the source
projector.
Info
When “Audio Out” has been set to “VAO”, fi rst make sure to lower the volume of the projector before turning the power on or of f and when switching the input.
•

7 Speaker Setting

Selectable
items Description
On The audio signal is output fro m the
internal speaker.
Off The audio signal is not outpu t from the
internal speaker.

8Audio Input

This function allows you to selec t an appropriate combination of au dio input terminals for each input mode .
Selectable
items Description
Audio 1 The AUDIO 1 input terminal is use d as
an audio input terminal
Audio 2 The AUDIO 2 input terminal is use d as
an audio input terminal.
HDMI HDMI terminal is used as an audi o
input terminal. (This item i s available
with HDMI input.)
9

Selecting the Transmission

Speed (RS-

232C)

Make sure that both the projector an d computer are set for the same bau d rate.
Selectable
items Description
9600bps
38400bps
115200 bps
Transmission speed is slow.
Transmission speed is rapid.

0Fan Mode Set ting

This function changes the fan r otation speed.
Selectable
items Description
Normal Suitable for normal environments.
High Select this when using the pro jector at
altitudes of approximately 1,500 m eters
(4,900 feet) or more.
When “Fan Mode” is set to “High”, the fan rotatio n
speeds up, and the fan noise bec omes louder.

System Lock Function

This function prevents unauth orized use of the projector. Once this function is ac tivated, users must enter the correc t keycode each time the projector is turned on. We s uggest you record the keycode in a s afe place where only authorized users have access.
Info
If you lose or forget your keycode, contact your nearest Sharp Authorized P rojector Dealer or Service Center (s ee page 61). Even if the product warranty is valid, the ke ycode reset will incur a charge.
•
a
Setting/Changing the keycode
1 Select “System Lock”, the n press
ENTER or Q.
2
Select “Next”, then pr ess ENTER.
The screen for entering the keycod e appears.
•
1
2

Adjusting the Projector Function (“PRJ - ADJ” Menu)

(Continued)

Menu operation n Page 38