2
INFORMATION
This equipment has been tested and found to comply with th e limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are de signed to
provide reasonable protection against harmful inter ference when the equipment is
operated in a commercial environment. This equip ment generates, uses, and can
radiate radio frequency energy and, if not installed and used in ac cordance with
the operation manual, may cause harmful interfere nce to radio communications.
Operation of this equipment in a residential area is l ikely to cause harmful
interference, in which case the user will be requi red to correct the interference at
his own expense. U.S.A. ONLY
The enclosed computer cable must be used with the d evice. The cable is
provided to ensure that the device complies with FCC Clas s A verifi cation.
U.S.A. ONLY
WARNING:
This is a Class A product. In a domestic environment this produ ct may cause
radio interference in which case the user may be require d to take adequate
measures.
PRODUCT DISPOSAL

This product utilizes tin-lead solder, and lamp containing a small

amount of mercury. Disposal of these materials may be regulated due

to environmental considerations. For disposal or recycling information,

please contact your local authorities, the Electronics Industries Alliance:

www.eiae.org, the lamp recycling organization www.lamprecycle.org, or

Sharp at 1-800-BE-SHARP. U.S.A. ONLY

Caution Concerning Lamp Replacement

See “Replacing the Lamp” on page 55.
This SHARP projector uses a DLP® chip. This very sophisticated panel contains 1,024,000
pixels (micromirrors). As with any high technology electronic equipment such as large screen
TVs, video systems and video cameras, there are certain acceptable tolerances that the
equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.
Authorized representative responsible for the European Union Community Market
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg E.U. ONLY