49

Useful
Features
Setting up the Projector Network Environment (“Net work” Menu)
Menu operation n Page 38
SEL./ADJ. ENTER END
Pict. SCR PRJ Network Help
Password Disable
DHCP Client Off
TCP/IP
MAC Address
Projector
XX : XX : XX : XX : XX : XX
XX-XXXX
4
2
3
1

1 Setting a Password

If you do not want others to change the se tting for the “Network” menu, set a pas sword.
a

Setting a Password

1 Select “Password”, then p ress
ENTER or Q.
The screen for entering the passwo rd
appears.
Setting the Password
Old Password
New Password
Reconfirm
–
––––
–––
––––
Network
2
Press P or R to set the fi rst digit
in “New Password”, then press Q.
3 Enter the remaining 3 d igits, then
press ENTER.
To return to the previous digit, press O.
4 Enter the same passwor d in
“Reconfi rm”, then press ENTER.
The status for “Password” changes to
“Enable”.
Once the password is set, you must enter th e
password to change the “Network” me nu
settings.
•
Note
a

Changing the Password

1 Select “Password”, then p ress
ENTER or Q.
The screen for entering the passwo rd
appears.
•
•
•
•
1
2
3
4
1
2 Enter the password in “O ld
Password” using P,R,Q and O,
then press ENTER.
3 Enter the password in “N ew
Password” using P,R,Q and O,
then press ENTER.
4 Enter the same passwor d again
in “Reconfi rm” using P,R,Q and
O, then press ENTER.
If you do not need the password protection
for the “Network” menu setting s anymore,
press ENTER without entering the new
password in steps 3 and 4.
To cancel the password settings, press
RETURN.
•
•
Note

If you forget the password

If you forget the password, perfo rm the following procedure to delete it, t hen set a new password.On the projector, press
.
If ENTER is held down for more than 5
seconds, the operation butto ns on the
projector will be locked. (See page 48.)
You cannot use the buttons on the
remote control to delete the password.
•
•
Note
2
3
4