Menu Items

Adjustments for PC screen display

When you use the PC analog RGB input terminal to display a PC screen for the fi rst time, or when you change the setting of the PC, you need to perform the automatic adjustment from the ADJUSTMENT menu. (See page 26.)

Before making adjustments in the ADJUSTMENT menu or GAIN CONTROL menu, display an image to brighten the entire screen.

If you are using a Windows PC, use the adjustment pattern on the supplied CD-ROM.

Retrieving the adjustment pattern

1.Connect the monitor and computer.

2.Load the supplied CD-ROM into the computer’s CD-ROM drive.

3.Open the CD-ROM in [My Computer].

4.Double-click [Adj_uty.exe] to start the adjustment program.

The adjustment pattern will appear. Adjust the screen automatically or manually.

5.When adjustment is fi nished, press the [Esc] on the computer’s keyboard to quit the adjustment program.

6.Eject the CD-ROM from the CD-ROM drive.

TIPS

•If the display mode on the computer you are using is 65,000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored. (This is due to the specifi cations of the input signal and is not a malfunction.)

Automatic adjustment procedure

1.Set the input mode to “ANALOG” and display the adjustment pattern above.

2.Press MENU and display the ADJUSTMENT menu.

3.Press and select “AUTO”. The automatic adjustment is complete in several seconds.

4.Press MENU six times to close the menu screen.

TIPS

•If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary.

ENGLISH

31 E