Dimensional Drawings

Note that the values shown are approximate values.

34-5/16[871]

 

 

/8 [1432])

 

 

3

[1572]

[1509]

height (56-

61-

-59

Opening

8 /

16 /

 

7

7

 

Opening width (31-3/4[807])

1-9/16

[40]

36-5/16[923]

1/4 [6] 5-7/8

Unit: inch [mm]

Screw holes for mounting brackets

25-9/16[650]

1-9/16

[40]

17-5/ [440]

[150]

39-1/2[1003]

16

When mounting the monitor, read the manual of the brackets or stand for their mounting procedure. The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. Note that screw hole depth of the monitor is 1-3/16inch (30 mm). Loose holding may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 3/4 inch (20 mm) length of thread. SHARP recommends using mounting interface that comply with UL1678 standard.

E52