Sharp PN-655RU RS-232Ccommand table, Power control/Input mode selection, <How to read the command table

Controlling the Monitor with a PC

RS-232C command table

<How to read the command table>

Command:	Command fi eld (See page 35.)
Direction:	W	When the “Parameter” is set in the parameter fi eld (see page 35), the
		command functions as described under “Control/Response Contents”.
	R	The returned value indicated under “Reply” can be obtained by setting
		“????”, “	?” or “???+” (repeater control) in the parameter fi eld (see
		page 35).
Parameter:	Parameter fi eld (See page 35.)
Reply:	Response (Returned value)

* “Yes” indicates commands which can be used in power standby mode.

Power control/Input mode selection

Control item	Command	Direction	Parameter	Reply	Control/Response contents	*
POWER CONTROL	POWR	W	0		Switches to standby mode.
			1		Returns from standby mode.
		R		0	Standby mode	Yes
				1	Normal mode
				2	Input signal waiting mode
INPUT MODE SELECTION	INPS	W	0		Toggle change for input mode
			1		PC digital RGB (DVI) (DIGITAL)
			2		PC analog RGB (ANALOG)
			3		Component (COMPONENT)
			4		VIDEO	Yes
		R		1	PC digital RGB (DVI) (DIGITAL)
				2	PC analog RGB (ANALOG)
				3	Component (COMPONENT)
				4	VIDEO

E42