Sharp operation manual Using the PW-E420 for the first time, If the power cannot be turned on

Getting Started

Using the PW-E420 for the first time

Be sure to perform the following operations before using the PW-E420 for the first time.

1. Set the battery replacement switch on the bottom of the unit to the ‘REPLACE BATTERY’ position.

2. Remove the battery cover.

3. Insert the one battery. Make sure the battery polarity is correct.

4. Replace the battery cover.

5. Set the battery replacement switch to the ‘NORMAL OPERATION’ position.

6.Open the unit and press Oto turn the power on.

The LCD contrast screen will appear.

•Should a different screen appear, follow the reset procedure on page 44.

•If the power cannot be turned on:

•Make sure the battery replacement switch is placed at the ‘NORMAL OPERATION’ position, then press Oagain.

•If the power still cannot be switched on, try following steps 1 through 6 in the above procedure again.

7.Adjust the LCD contrast by using [], and press E.

The main menu screen will appear.

•The LCD contrast setting can be adjusted later in the Set-up menu (Menü-Einstellun- gen).

5