•Avoid the following environments: Dusty and humid places Direct sunlight
Iron powder (A permanent magnet and electromagnet are used in this machine.)
•Use the print head release lever only when necessary.
•Never pull the paper when it is in contact with the print head. First release the head with the print head release lever, and then remove the paper.
•Never touch the surface of the print head.
•Never touch around the print head and the motor during printing or before they have had sufficient time to cool.
■Cautions in handling the recording paper (thermal paper)
•Use only the paper specified by SHARP.
•Do not unpack the thermal paper until you are ready to use it.
•Avoid heat. The paper will color at around 70°C.
•Avoid dusty and humid places for storage. Avoid direct sunlight.
•The printed text on the paper can discolor under the following conditions: Exposure to high humidity and temperature
Exposure to the direct sunlight
Contact with glue, thinner or a freshly copied blueprint.
Heat caused by friction from scratching or other such means. Contact with a rubber eraser or adhesive tape.
•Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed text with a photocopier.
