Sharp UP-820F instruction manual Individual type, Discount is not allowed, Total 10.60, Two

Individual type

This function is convenient for matching several PLU/EAN items and selling them in a lump (e.g. value meal etc.). Operation is the same as for normal PLU/EAN. The promotion table consists of the text for the table, a maximum of 25 objected items (selected from PLU/EAN, department or group), trip levels (the number of entries to be satisfied) for each item, promotion type and promotion detail. The promotion detail depends on the promotion type. In the example below, percent discount is used as the promotion type.

The programmed promotion entry will be made under the following condition:

• The quantities of each of the objected items meet the corresponding trip levels programmed in the promotion table.

Objected items of table no. 2: Item-A (*3.00), Item-B (*2.50), Item-C (*2.10)

Trip levels for each item:	Item-A (1), Item-B (1), Item-C (2)
Promotion type:	Percent discount
Promotion detail:	Percent rate (40.00%)

		<Sale 1>			<Sale 2>
	Item-A		*3.00	Item-A		*3.00
	Item-B		*2.50	Item-A		*3.00
	Item-C		*2.10	Item-B		*2.50
	Item-C		*2.10	Item-C		*2.10
	Subtotal		*9.70	Subtotal		*10.60
	Discount		-3.88	Discount		-0.00	Discount is not allowed.
	Total		*5.82	Total		*10.60	(Q’ty of the item-C should be
							two.)
Example		In the case of <Sale 1> above
			Key operation				Print

Treated as *3.00 item Treated as *2.50 item Treated as *2.10 item Treated as *2.10 item

40

41

42

42

c

Promotion discount

45