Sharp UP-820F Intermediate GLU reading, Bill totalizing/bill transfer, Bill transfer

■Intermediate GLU reading

This function is used for temporary inspection of the guest check. The details of the guest check can be printed on the receipt or the slip. For selecting these printers, contact your authorized SHARP dealer.

Procedure					e
	*GLU code	e		RECEIPT
b			OUTPUT	SLIP	e

*You can display open GLU codes by pressing the skey.

NOTE • This function is available after finishing the guest check entry.

•If the intermediate GLU finalization check is set to compulsory (INTERMEDIATE FINAL is set to

DISABLE in FUNC. PROHIBIT), a guest check cannot make settlement without printing the GLU using the intermediate GLU reading function (temporarily finalization by the for ıkey is available.)

Example Key operation Print

b

Enter a GLU code.

e

Select “RCPT”.

e

■Bill totalizing/bill transfer

Bill totalizing

The bill totalizing function is used to totalize multiple bills when, for example, a particular guest pays not only his or her bill, but also the bills of other guests.

Procedure					Adding the total amount of the
					previous bill to that of the new bill
O		[Select the GLU code]
									ı (Without receipt printing)
	# 1GLU code		g	B		# 2GLU code		g
									[Payment operation]
		(1 to 9999.9)					(1 to 9999.9)

NOTE	• #1 bill and #2 bills are merged into one bill. The GLU code on the merged bill is determined by
	the last entered #2 bill. A maximum of 5 bills is available for #2.

•The GLU code of #1 must be in use. If the guest check(s) of #1 or #2 has already been handled by another clerk, the guest check(s) must have been made “Transferring out.”

Example Key operation Display

1002 g

B

1003 g

ı

Bill transfer

This function is used to change the GLU code of a particular bill.

Procedure	O		[Select the GLU code]
70		# 1GLU code		g	B	# 2New GLU code		g	ı(Without receipt printing)
			(1 to 9999.9)				(1 to 9999.9)