Sharp UP-820F PLU level shift for direct PLUs, Automatic return mode for PLU levels

■PLU level shift (for direct PLUs)

This shift can add to the number of direct PLUs on your POS terminal without adding additional direct PLU keys. You can use direct PLUs in ten levels by utilizing the PLU level shift number key äor the PLU level shift keys ⁄thru A.

Level key shifts the PLU level from the other nine to the required level. (The normal level is the level 1.) You must program your machine in the PGM mode to select one of the two PLU level shift modes — automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the REG and MGR modes or in the MGR mode alone.

*The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU key or finalizing each transaction.

**The lock shift mode holds the current PLU level until depression of a PLU level shift key.

Automatic return mode (for PLU levels)

If your terminal has been programmed for PLU level in the automatic return mode, press a desired PLU level shift key before a numeric entry.

Procedure

(Returning every item entry) n:PLU shift no.

n	ä
		Numeric entry
⁄through A		(Q’ty, x)	Direct PLU

(Returning every transaction)

Return to level 1

n ä

⁄ through A

Numeric entry	Direct PLU	(Finalization)
(Q’ty, x)

NOTE When you use the FF method, you need not press the xkey for multiplication entries.

52