Setup

Using the Swivel Stand

You can adjust the angle and direction of the projected image by using the Swivel Stand.

1 Unlock the lever on the Swivel Stand.

2 Adjust the angle and direction of the projected image as you want by lifting up the projector and rotating the projector on the Swivel Stand.

Caution

•Do not hold the lens when lifting, lower- ing or rotating the projector.

•When lowering the projector, be careful not to get your fingers caught in the area be- tween the Swivel Stand and the projector.

Note

•When the height or direction of the pro- jector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 33 for details on the keystone correction.

3 Lock the lever on the Swivel Stand.

1

Swivel Stand

LOCK/UNLOCK lever

2

Adjustable up to ±10° from the standard position.

Adjustable up to ±25° from the standard position.

Adjustable up to ±3° from the standard position.

3

Removing the Swivel Stand

1 Lift the projector (2) with pressing the removing-stand button on the back of the projector (1).

2

1

Removing- stand button

-24